1 頁 (共 1 頁)

自動退出系統

文章發表於 : 2017年 10月 21日, 05:51
xveuwx0711
您好:

請教…為何有時在使用系統時,在要列印的時候,會自動直接退出系統?

Re: 自動退出系統

文章發表於 : 2017年 10月 21日, 06:11
o慕雲o
xveuwx0711 寫:您好:

請教…為何有時在使用系統時,在要列印的時候,會自動直接退出系統?


您好
這個應該不會喔
在列印那邊並無結束程式的指令
不知是否您其它軟體關閉了程式(如防毒軟體之類的)

Re: 自動退出系統

文章發表於 : 2017年 10月 21日, 06:16
xveuwx0711
不知道…快閃出現了錯誤訊息…很快的…系統就關閉…有時候看的到錯誤訊息…若有機會再拍下來

Re: 自動退出系統

文章發表於 : 2017年 10月 21日, 06:18
o慕雲o
xveuwx0711 寫:不知道…快閃出現了錯誤訊息…很快的…系統就關閉…有時候看的到錯誤訊息…若有機會再拍下來


好的
若您有看到錯誤訊息也來得及拍下來的話再傳給我看看
感謝您

Re: 自動退出系統

文章發表於 : 2018年 2月 23日, 09:58
xveuwx0711
有時使用到一半會退出系統…通常在列印報表時最容易碰上

Re: 自動退出系統

文章發表於 : 2018年 2月 23日, 10:29
o慕雲o
xveuwx0711 寫:有時使用到一半會退出系統…通常在列印報表時最容易碰上


您好
這個狀況是 Windows 系統無法正常處理程式的指令
這狀況多半是 Windows 系統問題(由其是 Windows 10)
https://answers.microsoft.com/zh-hant/w ... 88ff21db3b

這部份與程式本身無關係喔

Re: 自動退出系統

文章發表於 : 2018年 2月 24日, 06:25
xveuwx0711
如需叫用 Just-In-Time (JIT) 偵錯的詳細資料,
請參閱本訊息結尾處 (而非這個對話方塊) 的資訊。

************** 例外狀況文字 **************
System.ArgumentException: 參數無效。
於 System.Drawing.Bitmap..ctor(Int32 width, Int32 height, PixelFormat format)
於 System.Drawing.Bitmap..ctor(Int32 width, Int32 height)
於 ao.a(Int32 A_0)
於 fi.f(Object A_0, EventArgs A_1)
於 System.Windows.Forms.Control.OnClick(EventArgs e)
於 System.Windows.Forms.Button.OnClick(EventArgs e)
於 System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
於 System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
於 System.Windows.Forms.Control.WndProc(Message& m)
於 System.Windows.Forms.ButtonBase.WndProc(Message& m)
於 System.Windows.Forms.Button.WndProc(Message& m)
於 System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
於 System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
於 System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** 已載入的組件 **************
mscorlib
組件版本: 2.0.0.0
Win32 版本:
程式碼基底: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
買賣業進銷存
組件版本: 3.4.0.0
Win32 版本: 3.4.0.0
程式碼基底: file:///D:/1060313共用資料夾/營業助理-買賣業進銷存/買賣業進銷存.exe
----------------------------------------
Microsoft.VisualBasic
組件版本: 8.0.0.0
Win32 版本: 8.0.50727.8825 (WinRelRS3.050727-8800)
程式碼基底: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
組件版本: 2.0.0.0
Win32 版本:
程式碼基底: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
組件版本: 2.0.0.0
Win32 版本:
程式碼基底: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
組件版本: 2.0.0.0
Win32 版本: 2.0.50727.8825 (WinRelRS3.050727-8800)
程式碼基底: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------

Re: 自動退出系統

文章發表於 : 2018年 2月 24日, 06:59
o慕雲o
xveuwx0711 寫:如需叫用 Just-In-Time (JIT) 偵錯的詳細資料,
請參閱本訊息結尾處 (而非這個對話方塊) 的資訊。


您好
請問這訊息是否為在 [列印時] 會出現呢?
我看該訊息是 Windows 的繪圖系統有問題(有可能是印表機驅動或是顯示卡驅動有問題)
感謝您

PS:您可使用其它電腦測試使用看看或是試著把 [預設印表機] 換其它台印表機試試